Auto Detailing / External auto detailing

This package differs from the package Auto Detailing Standard only in omitting the process of cleaning the inside of the vehicle, making it the slightly simplified form of Auto Detailing Premium package, dedicated to those who want the car body to look fresh again not spending too much money. It contains only a single stage of paint correction designed to refresh the appearance of the paint and to remove only a part of scratches and tarnishes without eliminating all defects in the paint.
- Initial wash (contactless)
It consists of the coverage of vehicle with safe for lacquer, rubber and plastics, active PH-neutral foam, which is aimed at removing the top layer of dirt to minimize the risk of scratching the lacquer during the washing by hand. After a few minutes, active foam with dirt is rinsed from the car body by means of water under pressure.
- Cleaning proper (manual)
This is the safest way to wash your vehicle by using a very soft microfiber gloves or natural sheep wool and two buckets (one containing a solution of water and car shampoo with a neutral pH, while the other contains only water for rinsing the glove from dirt collected from the car body) equipped with inserts of Grit Guard type, retaining pollution at the bottom of the bucket.
Cleaning the wheels
In case of this package of services, the wheels are not taken off the car. We clean rims using the agents which are matched to their type (lacquered, polished, chromed, etc.) and safe for their trim, effectively eliminating dirt, using the appropriate brushes with soft bristles safe for their surface. 
- Cleaning of inner wheel arches, wheel houses, etc.
With this package of services, the inner wheel arches are cleaned to an extent which is dependent on the access to them without removing the wheels. All seals, cracks and recesses (grills etc.) are cleaned by applying special agents and brushes with soft bristles.
- Decontamination (removal of contaminants strongly adhering to the lacquer)
This stage consists of the removal of traces of tar from lacquer with a specially adapted agent. Then, the clay bar is used in order to remove the contaminants strongly adhering to the paint such as tree sap, insect residues, metal contaminants, etc. leaving it perfectly clean and smooth.
- Correction of the lacquer
One-stage process of polishing the lacquer with a professional polishing machine and carefully selected polishing pastes and pads adjusted to specific lacquer and its condition.
Correction of lacquer aims at renewal of its colour and removing some scratches and tarnishes without removing all defects.  This process is carried out with great care and attention to remove the thinnest layer of paint to be able to remove the newly created imperfections in the future. 
- Preparation of lacquer for protection
After the paint correction process, it is carefully cleaned of any residues of polishing pastes and then the specific agent is of pre-wax cleaner type aimed at making the lacquer look as good as possible and prepare the surface for the application of final protection in the form of wax, maximizing at the same time its durability.
- Protection of lacquer
This process involves the manual application of the highest quality natural wax, based only on natural ingredients such as fruit oils, carnauba wax etc.
It is intended to provide exceptional look and high gloss and depth of color of the lacquer, as well as protection against the harmful effects of external factors and weather conditions.
- Protection of wheels
Rims are covered, from the outside, with a layer of special synthetic wax, resistant to high temperatures and providing the rims with perfect appearance. It also slows down the process of soiling of rims because e.g. the adhering of dust from brake shoes to its surface is much more difficult and it is easier to clean them.  
Application of hydrophobic coating on glass.
All windows of the vehicle, after cleaning, are covered with a layer of hydrophobic coating on the outside providing water repulsion. Therefore, when driving in the rain at speed above ~ 60 km / h, using the wiper becomes unnecessary because the water is collected in drops and, with the momentum of the air flowing over the vehicle, they are drained from the windscreen. This coating also causes the glass to soil at a slower rate.
Application of dressings on tires and plastic elements.
The tires and plastic elements are covered with dressings aimed at smartening up the materials and restoring their fresh look and giving protection from UV rays.
Duration of works: about 1,5 working days